In this study, porous stainless steel (STS316L) sintered body was fabricated by powder metallurgy method and its properties such as porosity, compressive yield strength, hardness, and permeability were evaluated. 67.5Fe-17Cr- 13Ni-2.5Mo (wt%) powder was produced by a water atomization. The atomized powder was classified into size with under 45 μm and over 180 μm, and then they were compacted with various pressures and sintered at 1210°C for 1 h in a vacuum atmosphere. The porosities of sintered bodies could be obtained in range of 20~53% by controlling the compaction pressure. Compressive yield strength and hardness were achieved up to 268 MPa and 94 Shore D, respectively. Air permeability was obtained up to 79 l/min·cm₂. As a result, mechanical properties and air permeability of the optimized porous body having a porosity of 25~40% were very superior to that of Al alloy.

Citations

Citations to this article as recorded by  

• Printability and physical properties of iron slag powder composites using material extrusion-based 3D printing
  Hyungjin Kim, Sangkyu Lee
  Journal of Iron and Steel Research International.2021; 28(1): 111.     CrossRef
• Study on Effects of Mold Temperature on the Injection Molded Article
  J.-H. Han, Y.-C. Kim
  Archives of Metallurgy and Materials.2017; 62(2): 1271.     CrossRef